Stump Removal in Rochester Hills, MI
Rochester Hills is home to rolling subdivisions, wooded backyards, and mature trees that often leave stumps behind after removals or storm damage. We provide quick, clean stump grinding for properties near Oakland University, Meadow Brook Hall, Yates Cider Mill, and throughout neighborhoods north and south of M-59.
Stumpocalypse focuses exclusively on stumps—no waiting weeks for a tree service to “fit you in.” Expect fast scheduling, precise work, and a tidy finish ready for seed or sod.
Recent Rochester Hills Job: Start to Finish in 30 Seconds
Stumps ground out, grindings bagged and hauled away, then topsoil and seed so the lawn grows right back in.
Transparent Pricing
- Priced by stump size, access, and cleanup
- Exact price confirmed before any work in Rochester Hills
- Multiple or large stumps quoted on-site
No hidden fees. No surprises.
Our Process (Simple as 1–2–3)
- Call or request a quote — (810) 673-7173 or use our online form.
- Schedule quickly — most jobs completed in 24–72 hours after MISS DIG locates clear.
- Grind and clean up — 6–16″ below grade; chips neatly raked over the hole.
Built for Rochester Hills Properties
Large suburban lots, sloped driveways, and mature landscaping—we handle them all. Our compact tracked grinder protects turf and hardscape while powering through the hardwood stumps common across Rochester Hills.
- Fits through side yards & gated access
- Low ground pressure protects lawns & pavers
- Fast removal of oak, maple, and ornamental stumps
Insured, Local, MISS DIG Safe
- Michigan-based, serving Rochester Hills & nearby cities
- Fully insured for your peace of mind
- Clear communication—from quote to clean-up
- Respect for your property & schedule
Ready to Remove Your Stump in Rochester Hills?
Call (810) 673-7173 or get an instant estimate online.
Professional Stump Grinding in Rochester Hills, MI
Text a photo and get your quote the same day. The owner grinds every stump below grade and leaves the spot raked level. Insured, MISS DIG safe.
Free quote · No obligation · Same-day quotes
Ground below grade. Raked level. Done by the owner.
Our Service
We specialize in safe, mess-free stump removal for homeowners and businesses across Metro Detroit. Whether it's a single stump in a tight backyard or a large commercial clearing project, we bring precision, professionalism, and respect to your property.
Let us grind it down so your yard can grow back up — cleaner, safer, and ready for what's next.
📍 Our Service Area
We proudly serve Metro Detroit's finest communities — including Birmingham, Bloomfield Hills, Franklin, West Bloomfield, Huntington Woods, Beverly Hills, Troy, Royal Oak, Ferndale, and surrounding neighborhoods.
Don't see your city? Contact us — we likely grind there too.
Before launching Stumpocalypse, I founded HomeGrown Cycles — a trusted mobile bicycle repair service that’s been serving this same community since 2009. The same reliability, craftsmanship, and attention to detail that built HomeGrown Cycles now drive Stumpocalypse — fast, clean, and safe stump grinding.
“It looked like a stump never existed in that spot!”
He was very communicative, updated me throughout the job, and made sure all debris/mess was cleaned before leaving.
Communication was super-fast and clear, pricing was transparent (no surprises), and they had my stump out in no time.
Alan delivered above and beyond my expectations!
Had 14 stumps removed in just one day and I’m very impressed with the work.
Their machine did an excellent job in removing the stump and was in & out within an hour. 10/10 would recommend and use again.
Professional service, affordable price and done in minutes!
Real jobs, start to finish.
This Stump Grew Completely Around a Steel Fence
Decades of growth had swallowed an entire fence line, posts and top rail buried dead center in the trunk.
The fence line ran straight through the trunk. Steel posts, woven wire fencing, and a heavy top rail were fully embedded after years of the tree growing around them.
Steel cut out section by section, stump ground below grade, and the site left clean. If your stump has a complication like this, it is exactly the kind of job we take.
Decades of growth had swallowed an entire fence line — posts and top rail buried dead center in the trunk, and not flimsy hardware either: this was 40 year old steel fencing, made to last. Grinder teeth and steel do not mix, so this one took surgery. We cut the overgrown stump down to rail height with a chainsaw, torched through the top rail, then ground carefully into the center, clipping the woven steel fencing piece by piece as the grinder exposed it. Slow, methodical, done right — no shortcuts and no trace left behind.
- Complication
- Embedded steel fence line
- Method
- Chainsaw, torch, then grind
- Equipment
- Vermeer SC70TX
A 42 Inch Stump in a Clawson Front Lawn, Put Back Like It Was Never There
Ground below grade, eleven bags of chips hauled off, graded flat, topsoil, seed and straw.
Forty two inches across, sitting in the middle of the front lawn. Utilities located and flagged before anything started, which is how every job begins.
The SC70TX works the cutting wheel side to side, taking the stump and the surface roots down well below grade so nothing is left to settle or sprout.
Every wood chip hauled off site, eleven bags of it, then the low spot filled with screened topsoil and graded flat with the rest of the lawn.
Seeded and covered with straw to hold moisture and protect it while it takes. A few weeks of watering and the lawn closes over it completely.
This one sat dead center in the front yard, 42 inches across at the base, right where everybody driving past could see it. The homeowner did not want a patch of wood chips left behind and did not want to finish the job themselves. So we took it all the way. Utilities located and flagged first, then the stump ground below grade. Every chip was hauled off the property, filling eleven yard waste bags. Then the crater was graded flat with the surrounding lawn, covered with fresh screened topsoil, seeded, and blanketed in straw to hold moisture and keep the birds off while it comes in.
- Location
- Clawson, MI
- Stump
- 42 inches across
- Chips removed
- 11 yard waste bags
- Finish
- Graded, topsoil, seed and straw
- Equipment
- Vermeer SC70TX
This Stump Had No Way In, So We Went Through the Neighbors
Two neighbors, two fence panels off, one route in, and a bees nest to deal with first.
Buried in growth, jammed into the corner where the shed meets the fence. No clearance on any side and no way to reach it from the homeowner’s own yard.
Two neighbors, two fence panels off, one route in. Coordinating access across property lines is part of the job when there is no other way to reach the stump.
Stump gone, chips raked out and spread around the shed, fence panels reset. The corner went from unusable to clean.
Tucked in the back corner behind a shed, pinned tight against a privacy fence, and completely unreachable from anywhere on the homeowner’s own property. There was no gate wide enough and no path around. So we solved it from the outside: we got permission from two neighboring homeowners, took down a privacy fence panel on each of the two property lines, and brought the grinder in across their yards. The stump also had an active bees nest in it, which had to be handled and cleared before anyone could safely work on it. From the last point the machine could reach, every hand tool went in on foot across a long back yard. Stump ground out, chips raked up and spread around the shed, and both fence panels put back the way we found them.
- Access
- Through two neighboring yards
- Fence panels
- 2 removed and reset
- Complication
- Active bees nest in the stump
- Tools
- Carried in by hand
- Equipment
- Vermeer SC70TX
Ringed by Concrete on Every Side, in Royal Oak
Three stumps tight to the house and garage, the worst one in a cutout in the middle of a concrete patio.
Sitting in a round opening in the patio with slab on every side. Zero clearance to work with and concrete to answer for if the wheel wandered.
Ground below grade inside the opening, chips settled back into the cutout, and not a mark on the surrounding concrete.
Same patio, same opening. The tight ones are the jobs worth having the right machine and a steady hand for.
This Royal Oak homeowner had three stumps on the property and every one of them was tight against something that could not be damaged: the house, the garage, or a structure. The worst of the three sat in a round cutout in the middle of a concrete patio, with slab on all sides and only the width of the cutout to work in. There was no room to swing wide and no margin for a mistake, because anything the wheel touched outside the opening was concrete we would be paying to replace. The patio also sat a couple of inches proud of the grade, so boards and plywood went down to walk the machine up over the lip without chipping the edge. From there it was slow, deliberate grinding, taking it down below grade inside the opening and leaving the chips to settle back into the cutout.
- Location
- Royal Oak, MI
- Stumps
- 3 on the property
- Complication
- Concrete patio on all sides
- Access
- Boards and ply over the patio lip
- All three
- Tight to house, garage or structure
Fences, concrete, tight access, big hardwoods — send the photo, we quote it straight.
Prefer to measure it first? Show us your stump
GRIND IT
How We Work
Professional Results, Every Time
Vermeer SC70TX Stump Cutter
We don't show up with a rental. The SC70TX is our dedicated machine — a tracked, commercial-grade stump cutter engineered for tight residential yards, steep grades, and clean results every time.
Insured & MISS DIG Safe
Fully insured, and we open a MISS DIG ticket before every job so buried utility lines are marked before we grind.
Transparent Communication
From start to finish, we keep you informed. Text and photo updates available upon request — no surprises.
The Process
Done in 3 Simple Steps
Text Us a Photo
Snap the stump and text it to (810) 673-7173, or use the quote form. Add your city or address.
Get Your Price the Same Day
We look at your photo and text back a clear, no-surprise quote, usually the same day. No obligation.
We Grind It Out
Once you approve, we request MISS DIG utility marking (about 3 business days). We’re on-site within 24–72 hours after it clears, grind below grade, and clean up.
or text a photo to (810) 673-7173
About:
Stumpocalypse LLC is a stump-grinding-only business proudly serving Metro Detroit. We focus exclusively on removing tree stumps with speed, safety, and precision using professional-grade equipment. As a locally owned and insured company, we are committed to clean results, honest service, and customer satisfaction. Whether it’s one stump or several, Stumpocalypse is here to help you clear the way and take back your yard.
Before & After
